Dakota Forumz banner

Receiver Drier question...

2K views 3 replies 2 participants last post by  RalphP 
#1 ·
My ac was not working so we looked for leaks and found one at the drier, so we replaced the drier, plus I replaced the txv valve just in case. The drier again had a leak before the drier and we could never get it to seal. I just ordered a new drier and a new set of hoses from the compressor to the condenser and it has the line that goes to the drier.

My main question is this: the other driers came with these small metal gaskets that in-between the drier and the connecting hoses/pipes. The new drier did not come with these. So do I need to use the old gaskets, buy new ones, or not use them all together?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top