Dakota Forumz banner
1 - 3 of 3 Posts

·
Registered
2003 Dakota Sport, club cab, 3.9L V6, 5 speed manual
Joined
·
1,050 Posts
The bearing for the rear axle is not part of the hub like the front axle. You must remove the axle shaft from the rear end and you will find the bearing pressed into the end of the axle tube. To remove the axle shaft you have to remove the cover for the differential housing and remove the 'c' clip from the inner end of the axle shaft so you can slide the axle shaft out. Strongly recommend you get some type of manual, Haynes or Chilton, FSM is best, before attempting this project.
 
1 - 3 of 3 Posts
Top