Dakota Forumz banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Has anyone tried swapping a Dakota seat from a newer model into the early 90's model? I have a 93 and would love to put a salvage seat from a newer truck dodge or not in if possible. This will need to be a bench seat.
 

·
Registered
Joined
·
1,201 Posts
Bench should swap in from a 1996 or earlier. Past that - worst case, you may have to drill a few mounting holes.

RwP
 

·
Registered
Joined
·
17 Posts
I got a 88 and just swaped in some chrysler buckets, the hard part is the 2 front bolts holes were they fold forward, and all i did for the 1 bolts in the rear is drill a new hole, and boom perfect fit.
 

·
Registered
Joined
·
1,201 Posts
I got a 88 and just swaped in some chrysler buckets, the hard part is the 2 front bolts holes were they fold forward, and all i did for the 1 bolts in the rear is drill a new hole, and boom perfect fit.
What year model buckets did you swap in?

I also have a 1988, and mine has the little brakets at each end ... long term plans include getting the long cross bracket out of a later Gen1 and replacing those short ones with the long one (so I have the spots for the front bucket mounts on the inside).

RwP
 
1 - 4 of 4 Posts
Top