Dakota Forumz banner

1 - 5 of 5 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
I have a 2006 Mitsubishi raider, it has side mouldings on each of the 4 doors, and I was wandering how to get the right front door moulding off. you can see on the left side the part I am talking about
 

Attachments

·
Registered
Joined
·
689 Posts
If you look at this listing on Ebay, the last picture shows the back side of the molding. It looks like it is simply held in place with double sided tape, in three strips. It should just pull off, not so easily I'm sure.
 

·
Registered
Joined
·
5 Posts
Discussion Starter #3
If you look at this listing on Ebay, the last picture shows the back side of the molding. It looks like it is simply held in place with double sided tape, in three strips. It should just pull off, not so easily I'm sure.

That moulding is not the same as mine but this one is

https://www.ebay.com/itm/2006-08-MITSUBISHI-RAIDER-PASSENGER-RH-FRONT-DOOR-PANEL-CLADDING-TRIM-MOLDING/273031326164?_trkparms=aid=222007&algo=SIM.MBE&ao=1&asc=20140131123730&meid=4c2231fb64124e718a160d17bd867a8d&pid=100167&rk=2&rkt=15&sd=272242127661&itm=273031326164&_trksid=p5411.c100167.m2940

thanks, JIM
 
1 - 5 of 5 Posts
Top