Dakota Forumz banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hey guys, just signed up. Was wondering if anyone had the same issue or can give me some advice.

It started with p0320, me and my dad could not get the sensor out, so we decided to drop the oil pan an push it out from inside the block. We put everything back together, fired it up. 1st it didn't want to stay running, kept dying off and it was in "safe mode". 2nd we had no brakes at all. then we bleed the brakes, nothing, changed the booster, nothing, bleed brakes again, no change. mean while the engine wants to die, fluctuating from 1000-2000rpm. now hears where its wired for me, when i removed the brake booster vacuum line, i had brakes, pumped them, stayed hard. and as soon as i connected back with the engine running, it died. HELP PLEASE any is appreciated.
 
1 - 1 of 1 Posts
Top