Dakota Forumz banner

1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Ok i have a cylinder 6 misfire 3.9 v6 00 dakota i got the truck about a month ago and i have done new spark plugs and wires. Went away but came back same day i did a compression test on cylinder 6 and it has 135 psi.

Any ideas what else it could be
 

·
Registered
Joined
·
2 Posts
Check your new spark plug in #6.
Use an old one if you saved it.
If you still have a miss, check your wire to #6, use an old wire, if you have one.
Check your cap and rotor, usually these are replaced with the plugs and wires.
Good luck
 
1 - 2 of 2 Posts
Top