Dakota Forumz banner
1 - 2 of 2 Posts

·
Registered
Joined
·
5 Posts
I would only worry about running the one o2 sensor, as long as it is reading the exhaust you will be fine, or if you want, you can run an x-pipe and I think you can put a o2 sensor bung on that so you are reading through both, it will read like you are running the y-pipe, but you should be fine either way.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top