Dakota Forumz banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I have a 4wd dakota with 2 inch blocks in the back and a torsion bar lift in the front. I am trying to fit 285/70r17. I have a 3 inch PA lift ready to install, however I would like to limit the body lift. Is it possible to cut the blocks that come with the kit down and if so how much. Also does cutting the blocks effect other parts of the PA lift. Thanks
 
1 - 1 of 1 Posts
Top