Dakota Forumz banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,211 Posts
Discussion Starter · #1 ·
wanted to know what size the stabilizer bar is on the front suspension of a 2000 R/T. i want to replace the bushings, but they range anywhere from 28mm to 34.5mm

i eyeballed it with a tape measure at 1.25 inches or 32mm, but i want to be sure

and is it better to err on the smaller size? meaning if i get 32mm and the bar is actually 33mm is that better or would the other way be better or should it be dead on?
 

·
Registered
Joined
·
1,211 Posts
Discussion Starter · #2 ·
well Advance Auto had the Moog K7353 32mm ones in stock so i got those. if they are the wrong size i can just return them. hope to get them and the end links installed friday.
 

·
Registered
Joined
·
1,211 Posts
Discussion Starter · #3 ·
well the 32mm ones were too small, wouldnt wrap around the bar all the way. so went back to advance and they did not have the larger size in stock and couldnt get them in time for me to replace them so had to put the old one back on, that we cut to get off.

getting the 34mm ones tomorrow and will try again soon.
 
1 - 3 of 3 Posts
Top