Dakota Forumz banner

Front steering knuckles

1511 Views 2 Replies 3 Participants Last post by  oldmarine
Hello! Recently the holes for the caliper pins stripped out on my steering knuckle,. To repair them my dad and I were going to use heely coils, but he tapped the hole the wrong way, and unless I take it to a machine shop I don't know if Ill be able to repair it. I looked for an OEM part, but they're like 1100$. I found some knuckles for a 1999 v6 Dakota for 140$ and I was wondering if anyone knew if they'd work on a 1998 dodge Dakota R/t. If these dont work does anyone have any other ideas?
1 - 3 of 3 Posts
Car-Part.COM shows only 1997 and 1998.

You may want to search there for good spindles shipped to you.

RwP
Or you can check at the link for availability at salvage yards nationwide. Disregard the photos - they only show the donor vehicle, not the part you're looking for.

https://www.hollanderparts.com/used-auto-parts/1998/dodge/dakota/suspension-steering/515-spindle-knuckle,-front
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top