Dakota Forumz banner

lift wanted

10K views 14 replies 13 participants last post by  rlenglish 
#1 ·
I have the curse of the 04 dakota, which means no one makes a lift kit for it. Does anyone know if you can make modifications to use a tuff country lift or any other brand?
 
#2 ·
dont woprry man i feel your pain lol no body makes one for my 92 either so i just had to custom lift it lol depending on high you want to go i just went three inch's which was blocked the rear and cranked torsion bars in the front which surprisingly enough leveled it right out
 
#15 ·
Airbagit.com sells 4 and 6 inch suspension lifts. If you are wheelin the you might have to beef up some of the components. Look at the instructions off of the website before buying. Make sure you are comfortable with cutting you frame because there is no going back. I ended up with torsion keys and rear blocks. The ride is stiffer. I run 33,s and they rub on the bumper. I may go with a 1 or 2 body lift.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top