Dakota Forumz banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Anyone having issues putting a 3 inch leveling kit on the front end.. Well I did, and the axles were binding hard. So I dropped the front pumpkin 2inchs with a kit. Now the axles are to long. Tried ordering shorter ones and its. Ot possible. Shops wanted over 1000 to shorten them.. So i cut a 1.25 inches off and used a coupler sleeve to shorten the cv axles and it worked. Wheels turn smoothly. If you not comfortable of the welded axles you can always respline the axles to shorten one end. That what im going to do in the future just needed to make sure this was the right length and problem.
2772
2773
2774
 
1 - 1 of 1 Posts
Top