Dakota Forumz banner

Motor Swap, Transmission Flexplate Bolt Up Not Matching

2K views 0 replies 1 participant last post by  JWalker358 
#1 ·
I have a 2003 Dodge Dakota v6 3.9l. The old motor was blown up so I got a new motor from a junk yard. It is the same x vin number motor It has a manual transmission set up on it. The transmission I have is an automatic. The flex plate does not bolt up to the motor, where the manual tranny flywheel was. The manual transmission set up has no flex plate just flywheel and clutch, where the automatic has the flex plate to torque converter set up.Am I able to buy a flex plate to bolt up or what do I have to do get them to match up?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top