Dakota Forumz banner
1 - 3 of 3 Posts

·
Registered
Joined
·
6 Posts
The pcv is not located in the either of the heads, it is located in your oil filler neck, closest to your airbox kinda hidden, gently push in and turn counter clockwise and pull it out otherwise if you break the plastic vent tubes on the heads they can be a pain to get ahold of sometimes takes a week for the dealer to get them and you dont need to do anything with them all they have is a pinhole limiting the amount vacuum coming through its not like a pcv.
 

·
Registered
Joined
·
5 Posts
on 2nd gen models it was located on the oil filler but on 3rd gens it's on the drver side rear intake manifold. it is tight for space but once u remove a couple of hoses out of the way a 24mm wrench or a crescent wrench will take it off. be patient.
 
1 - 3 of 3 Posts
Top