Dakota Forumz banner

1 - 1 of 1 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter #1
My 4.7 HO is ready to install in my 2000 Dakota, as this is my first all electronic engine I was looking to find a way to prime the oil system,all information I have seen says disable the engine electronics and spin it for oil pressure.Here is another way, remove the 1/2" pipe plug to access the oil gallery and install a fitting to connect a pump,I used a hand operated test pump and it did the job.This could be used for any engine.Fittings -Parker PD343 and Parker 240 with protective cover
 

Attachments

1 - 1 of 1 Posts
Top