Dakota Forumz banner
1 - 2 of 2 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter · #1 ·
While changing out the rotors and pads on my (relatively new to me) 1997 Dodge Dakota 3.9 4x4, I made the startling discovery that the passenger side caliper was being held in place by... gravity. Both of the caliper bolts were missing. Kinda helped explain the slightly shaky braking I had noticed earlier.

After looking at possible solutions, I decided to give the Dorman oversize caliper bolts a try. These self-tapping bolts cost about $50 for two, and they seem to have done the trick. I was wondering, though, if any of you have had any bad experiences with them that I need to be aware of.
 
1 - 2 of 2 Posts
Top