Dakota Forumz banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I have a 2000 dakota sport 4.7. I want to remove the manual engine fan and install a second electric fan. I'm looking for ideas on how to do it since the coolant/windshield was tanks are on the shroud. Any suggestions?
 

·
Registered
Joined
·
5 Posts
I have a 95 V8 Dakota & did the same thing. Except only the coolant overflow bottle was mounted to the fan shroud. I got another shroud, (so I didn't cut my original) I think a V8 or V6 shroud will work, cut the part that I needed to hold the over flow bottle & mount area for the radiator. I had a 2000 V8, but forget how the lay-out was on that set up. I'm sure you'll come up with a fix. Wiring it up is harder. Make sure you use relays & in-line fuses. (30 amp?)
 
1 - 2 of 2 Posts
Top