Dakota Forumz banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,543 Posts
The connector is off the cross fire wall harness, right there by the blower motor resistor. It's at the same junction that spits out the DLC (Data Link Connector) for the OBD1 scanner and a couple of other connectors.

The wire runs down with the wiring to the transmission there, but not in the bundle.

I'll try to get a pic of the connector on my 1988 later today, as I'm bleeding the brakes again.

RwP
 
1 - 3 of 3 Posts
Top